30m QRP transceiver – Part 2


The finished VFO, just before closing the lid.

Building a stable VFO is challenging. Oscillators tend to drift away due to (very small) temperature fluctuation, or due to small capacitive changes in the direct environment (e.g. the frequency changes when you move your hand towards the oscillator). The VFO used in my 30m QRP transceiver is not different from others, so I had to deal with the same issues. — more →

ATV transmitter for 23cm


Front view of my fully assembled 23cm ATV transmitter.

Although I was already able to receive the local ATV repeater PI6ATV, it has been a wish for about 8 years to be able to uplink too. So I once bought a couple of modules from PE1ACB that would allow me to do so. However, due to lack of time and other priorities the modules lost my attention and ended up on some shelf. Since I started my new job I have more spare time, which I spend (among other things) on this fantastic hamradio hobby. So then I remembered those modules. I designed a front panel and bought a case, switches and connectors. — more →

A very small active antenna


The kit contents: extensive documentation, a professional circuit board, and all necessary components.

Small active antennas like the “mini-whip” (by PA0RDT) are very popular at the moment. They provide good reception of signals from HF all the way down to the VLF band. Here in the Netherlands Van Dijken Elektronica sells a nice kit for this antenna, and since Adrian PA0RDA was interested in this antenna, I ordered this kit and built it. — more →

30m QRP transceiver – Part 1


The first modules of my 30m QRP transceiver.

This summer I want to go walking in the beautiful highlands of Scotland, together with my wife. The mobile phone coverage in this desolate area is none or poor, but hey… I’m a radio amateur! For a daily “sign of life” I need a lightweight transceiver, and 30m (10.100 – 10.150 MHz) seems to be a perfect band for this purpose.

After browsing the web for designs, I stumbled on the website of Onno PA2OHH. Besides lots of other interesting QRP projects, I found his NiceRig 40-30 QRP Transceiver. I immediately fell in love with this design and decided to build this thing.

Building this rig takes quite some time, so I publish this project in different posts, showing you the progress of this project. — more →