Neophyte receiver for 60 meter

[Image]

The receiver is ready, except the RX gain potmeter which is still in backorder…

The Neophyte receiver is an easy-to-build receiver, already built by lots of people. Many radio clubs used it as a project for starting builders. It was developed by John WA3RNC and first published in QST, February 1988. The circuit can be used to create either a 80m or a 40m receiver, depending on a few capacitors. The 60m band is just in between, therefore I decided to find out the correct caps for this new amateur radio band (well… at least new in the Netherlands, from December 2015).

— more →

Receiving SAQ and other VLF stations

[Image]

The huge VLF antenna of SAQ near Grimeton, Sweden (credits).

This article is about receiving radio stations operating in the VLF band (3-30 kHz). Due to the very low frequency, receiving such stations requires some special equipment, since most radios don’t support these low frequencies. One of the interesting stations in this band is SAQ, which occasionally transmits at 17.2 kHz. Other stations include submarine communications and time services. — more →

How to get rid of your prototype board

[Image]

The ATmega328 microcontroller, just removed from the Arduino board, ready to start living on its own.

When you started discovering microcontrollers, you probably bought some kind of evaluation or prototype board. The microcontroller chip itself is placed in a nice socket on a PCB, surrounded by power circuit, some I/O, and RS232 or USB connector for programming. But after a while you want to remove the chip from the board and place it in your first own application. What do you need to get the chip running? — more →