Short DL6WU yagi for 23cm

[Image]

My 23cm yagi antenna, in fixed position to the local ATV repeater.

In the previous Winter I built a HB9CV-in-a-box for 23cm for my uplink to the local ATV repeater PI6ATV. Although this antenna works nicely, its gain just isn’t enough when their 23cm preamp is broken (which, unfortunately, is the case most of the time). To achieve a more steady uplink, I decided to build an antenna with a bit more gain, at least 6 dB extra compared to the HB9CV. A short yagi should make this possible. — more →

ATV transmitter for 23cm

[Image]

Front view of my fully assembled 23cm ATV transmitter.

Although I was already able to receive the local ATV repeater PI6ATV, it has been a wish for about 8 years to be able to uplink too. So I once bought a couple of modules from PE1ACB that would allow me to do so. However, due to lack of time and other priorities the modules lost my attention and ended up on some shelf. Since I started my new job I have more spare time, which I spend (among other things) on this fantastic hamradio hobby. So then I remembered those modules. I designed a front panel and bought a case, switches and connectors. — more →

HB9CV-in-a-box antenna for 23cm

The antenna is mounted in my pole, just below the 23cm LNC. Both are pointing at the PI6ATV repeater.

The antenna mounted in my pole, just below the 3cm LNC. Both are pointing at the PI6ATV repeater.

The HB9CV has been a popular antenna for decades, especially on the 2m band where it is commonly used for direction finding (foxhunt). Others create arrays of HB9CV antennas for DXing. Since I needed a simple antenna for 23cm (to uplink to the local ATV repeater PI6ATV) I thought it would be nice to use this HB9CV design.

— more →

First ATV transmission

[image]

My first 23cm ATV transmission (camera output with text overlay), received by PI6ATV.

I’m working on a 23cm ATV transmitter. A couple of years ago I already bought some modules from PE1ACB: a baseband modulator, a 23cm ATV transmitter (output 1 watt) and a controller unit. Today I hooked up all modules, together with a title generator, a camera and a HB9CV antenna for 23cm. When powering on, I was able to transmit/uplink to the local ATV-repeater PI6ATV and see the result at the repeater’s output  at 10 GHz.

— more →